Delta AC Drive

Product Details:

Sub-fractional low cost AC Drive. Specifically designed for low horsepower applications with built-in EMI filter to efficiently reduce electromagnetic interference and to conform to the CE EMI directive.

1. Applications

Simple wood cutting, conveyer belt, wire drawing machine, etc. 2. Specifications

• Output frequency 1.0~400Hz

• Adjustable V/f curve

• Carrier frequency up to 10 kHz

• Auto torque boost and slip compensation

• Build-in MODBUS communication, baud rate up to 9600 bps

• Built-in EMI filter

Drive Model Number:-

1. VFD40WL21A
2. VFD001L21A
3. VFD002L21A
4. VFD004L21A
5. VFD007L21A

Product Details:

The VFD-EL series is multiple function new generation micro type AC drive. It has built in EMI filter, RFI switch, easy DC bus sharing for side-by-side installation, high precision current detection, overload protection, and a built In keypad.

1. Applications Small size pump & fan, blowing machine, conveyer belt, simple DIY processing equipment

2. Specifications

• Output frequency: 0.1~600Hz3 points adjustable V/f curve
• Built-in PID feedback control

• RFI-switch for IT mains

• Built-in EMI filter (for models 230V 1-phase and 460V 3-phase)

• Use RS-485 communication interface (RJ-45) with Modbus protocol

• Optional communication modules for multiple communication protocols, such as Profibus, DeviceNet, LonWorks and CANopen

• Complete protection function

Model Number
Delta EL Series VFD 230V

1. VFD002EL21A
2. VFD004EL21A
3. VFD007EL21A
4. VFD015EL21A
5. VFD022EL21A

Delta EL Series VFD 415V

1. VFD004EL43A
2. VFD007EL43A
3. VFD015EL43A
4. VFD022EL43A
5. VFD037EL43A

Product Details:

Sensorless Vector Micro AC Drive. The compact design is ideal for small and medium horsepower applications. The M drive is designed to provide an ultra-low-noise operation, and includes several innovative technologies that reduce interference.

Applications
Packing machine; dumpling machine; treadmill; temperature/humidity control fan for agriculture and aquaculture; mixer for food processing; grinding machine; drilling machine; small size hydraulic lathe; elevator; coating equipment; small size milling machine; robot arm of injection machine (clamp); wood machine (two-side woodworking planer); edge bending machine, elasticizer, etc.
Specifications

• Output frequency 0.1~400 Hz
• Adjustable V/f curve and vector control
• Carrier frequency up to 15 kHz
• Auto torque boost & slip compensation
• Built-in PID feedback control
• Built-in MODBUS communication, baud rate up to 38400 bps
• 0 speed holding function
• Built-in sleep / revival function
• Support communication module (DN-02, LN-01, PD-01)

Model Number
Delta M Series VFD 230V

• VFD004M21A
• VFD007M21A
• VFD015M21A
• VFD022M21A

Delta M Series VFD 415V

• VFD007M43B
• VFD015M43B
• VFD022M43B
• VFD037M43A
• VFD055M43A
• VFD075M43A

Product Details:

Delta's MS300 series is a standard compact vector control drive that inherits Delta’s superior drive technology. It supports both IM and PM motor control for application flexibility and provides STO safety mechanism. Also built-in various essential functions, including PLC capacity for simple programming needs, a communication slot for various communication cards, and a USB port to make data uploads and downloads fast and easy. Saving space, reducing setup and wiring time, while providing high efficiency and stability system —all included in the MS300 series with drive size reduced up to 40%.
Applications
Machine tools, textile machines, woodworking machines, packaging machines, electronics, fans, pumps, air compressors

Specifications

• Supports Open loop control of IM and PM motors
• Output frequency:
  Standard models: 0 to 599 Hz
  High speed models: 0 to 1500 Hz (V/f Control)
• Dual rating design:
  120% for 60 seconds for Normal Duty (ND)
  150% for 60 seconds for Heavy Duty (HD)
• Built-in PLC program with 2K steps capacity
• Built-in brake choppers for the entire series
• Removable 5-digit LED keypad for remote operation
• Safety standard compliance: Safe Torque Off (SIL2/PLd)
• Multi-motor Control???built-in four IM motor control parameters
• Optional built-in Class A (C2) standard EMC filter for 1-phase 230V, 3-phase 460V models
• One high speed pulse input terminal MI7 built-in with maximum speed up to 33kHz
• One high speed pulse output terminal DFM built-in with maximum speed up to 33kHz
• New PCB coating for circuit (IEC 60721-3-3 class 3C2) and thermal design suitable for harsh environment applications
• Built-in RS-485 (Modbus) and various communication card options : CANopen, PROFIBUS DP, DeviceNet, MODBUS TCP, EtherNet/IP, EtherCAT

Model Number
Delta MS Series VFD 230V

• VFD2A8MS21ANSAA
• VFD4A8MS21ANSAA
• VFD7A5MS21ANSAA
• VFD11AMS21ANSAA

Delta MS Series VFD 415V

• VFD1A5MS43ANSAA
• VFD2A7MS43ANSAA
• VFD4A2MS43ANSAA
• VFD5A5MS43ANSAA
• VFD9A0MS43ANSAA
• VFD13AMS43ANSAA
• VFD17AMS43ANSAA
• VFD25AMS43ANSAA
• VFD32AMS43ANSAA
• VFD38AMS43ANSAA
• VFD45AMS43ANSAA

Product Details:

Sensorless Vector AC Micro Drive. The VFD-E series represent Delta Electronics low horsepower, constant torque, IP20 rated Drive. Modular in design with flexible extension cards and a built-in PLC function, the E drive offers the ability to write and to execute simple Ladder Logic programs. This state-of-the-art series meets a full range of application requirements.

Applications
Smaller cranes; washing machines; treadmilsl; robot arm of injection machine (clamp); elevator; grinding machine; drilling machine; wood machine; webbing loom; air conditioner for large buildings; water supply system for large buildings, etc.
Specifications

• Output frequency: 0.1~600Hz
• Modular & compact design
• Built-in PLC function
• Built-in EMI filter (230V 1 phase / 460V 3 phase)
• Optional Fieldbus Modules (DeviceNet, Profibus, LonWorks and CANopen)
• RFI-switch for mains
• Easy DC BUS sharing
• Flexible extension
• Complete Protection

Model Number
Delta E Series VFD 230V

• VFD002E21A
• VFD004E21A
• VFD007E21A
• VFD015E21A
• VFD022E21A

Delta E Series VFD 415V

• VFD004E43A
• VFD007E43A
• VFD015E43A
• VFD022E43A
• VFD037E43A
• VFD055E43A
• VFD075E43A
• VFD110E43A
• VFD150E43A
• VFD185E43A
• VFD220E43A

Product Details:

The VFD-C200 Series is an intelligent vector control micro drive that provides versatile control modes for motors and includes built-in PLC functions with capacity up to 5,000 steps. It is suitable for harsh environment applications with a strengthened thermal and anti-dust design that provides comprehensive protection.
Applications:Food packaging machinery, conveyors, textile machinery, woodworking machinery, fans, pumps
Specifications:

• Built-in PLC program with 5,000 steps capacity
• Built-in brake chopper
• MODBUS RS-485 and CANopen (Slave)
• The high-brightness LED keypad shares the same extension cable of the VFD-E/M/B Series to maximize operation distance
• Supports open loop control of permanent motors (PM Sensorless)
• Two high speed pulse input terminals MI7 and MI8 built-in with maximum speed up to 33kHz
• Two high speed pulse output terminals DFM1 and DFM2 built-in with maximum speed up to 33kHz
• New PCB coating for circuit (IEC 60721-3-3 class 3C2) and thermal design suitable for harsh environment applications
• C200 Series Frame A supports wall mounted installation

Model Number:
Delta C200 Series VFD 230V

• VFD004CB21A-20
• VFD007CB21A-20
• VFD015CB21A-20
• VFD022CB21A-20

Delta C200 Series VFD 415V

• VFD007CB43A-20
• VFD015CB43A-20
• VFD022CB43A-20
• VFD037CB43A-20
• VFD040CB43A-20
• VFD055CB43A-20
• VFD075CB43A-20

Product Details:

Delta's Sensorless Vector Control Drive CP2000 Series has extended the idea of energy saving and uses this principal as the basis of its design. The CP2000 is specifically designed for applications such as air blowers, pumps and HVAC drives with its intelligent PID control providing the greatest efficiency. The Sensorless Vector Control (SVC) offers timely response to load torque increase/decrease which satisfies customer requirements for load changes while enhancing motor performance. A 3-step V/F curve response is used in the variable torque environment to adequately adjust the input voltage and attain the greatest overall performance; this function is especially helpful in pumps and fans applications. It also includes additional functions for operation and protection in variable load environments, such as flying starts, auto-acceleration/deceleration, momentary power loss restarts, auto-tuning, and more. The CP2000 series provides you with the ultimate energy-saving solution for your applications.

ApplicationsFixed-displacement pumps (fix flow and fix time), building automation, factory automation, HVAC drives, cooling pumps, cooling towers and general motor applications.
Specifications

• A wide range of models (0.75~400KW) to fulfill the demands of different industries.
• The modularized design eases the maintenance and expansion.
• High speed communication interfaces with MODBUS protocol and BACnet protocol built in. Diverse communication methods to satisfy clients needs on multi-controls. So the following options are available for you: the ProfiBUS-DP, the DeviceNet, the MODBUS TCP, the Ethernet-IP and the CANopen Cards.
• Long-life design and self diagnosis for key components.
• Special PCB coating design (Printed Circuit Board) for enhancing environmental tolerance.
• Complied with global safety standards: CE, UL and cUL Standard LCD model (IP20/NEMA1) with built-in PLC to support up to 10K steps Excellent heat-sink design. Able to operate at 50°C ambient temperature and to adjust automatically rated output value to make the AC drive to work continuously.
• Run fire mode while emergency to have uninterrupted smoke releasing and pressure adding Multi pumps control at fixed amount, fixed time circulating control. Able to control 8 pumps at the same time.

Model Number-Delta CP2000 Series VFD 415V

• VFD007CP43B-21
• VFD015CP43B-21
• VFD022CP43B-21
• VFD037CP43B-21
• VFD055CP43B-21
• VFD075CP43B-21
• VFD110CP43B-21
• VFD150CP43B-21
• VFD185CP43B-21
• VFD220CP43A-21
• VFD300CP43B-21
• VFD370CP43B-21
• VFD450CP43S-00
• VFD550CP43S-00
• VFD750CP43B-00
• VFD900CP43A-00
• VFD1100CP43A-00
• VFD1320CP43B-00
• VFD1600CP43A-00
• VFD1850CP43B-00
• VFD2200CP43A-00
• VFD2800CP43A-00
• VFD3150CP43A-00
• VFD3550CP43A-00
• VFD4000CP43A-00

Product Details:

This series adopts FOC (Field Oriented Control) which is a far more precise vector control algorithm. It can be used in both speed control and position control similar to a servo motor drive. The multi-function I/O terminal is expanded to meet users' various application needs. In addition, it is supplied with a Windows based PC software program for managing parameters and dynamic monitoring. It provides an excellent solution for load regulation. It can output 150% of rated torque at zero speed, and it can have "point to point" and relative distance control functions for position control, making it the best choice for challenging industrial control applications.

ApplicationsPower transmission equipment, elevator, crane, CNC tooling machines, extrusion machines, injection molding machines, and auto-storage and retrieval systems.

Specifications

• Output frequency: 0~600Hz
• 4 points adjustable V/F curve, Sensorless Vector Control, Field-Oriented Contro
• Position/Speed/Torque control mode
• ?Sensorless Vector Control 150% torque at 0.5Hz
• 150% holding torque with speed feedback
• Overload : 150% for 1 minute and 200% for 2 seconds
  Rotational/Static Auto-tuning for the motor parameters and Auto-tuning for load inertia
• Excellence torque limit in all 4 quadrants of operation
• Dual RS-485 ports, Fieldbus and PC software tools for applications

Model Number
Delta VE Series VFD 415V

• VFD007V43A-2
• VFD015V43A-2
• VFD022V43A-2
• VFD037V43A-2
• VFD055V43A-2
• VFD075V43A-2
• VFD110V43B-2
• VFD150V43A-2
• VFD185V43A-2
• VFD220V43A-2
• VFD300V43A-2
• VFD370V43A-2
• VFD450V43A-2
• VFD550V43C-2
• VFD750V43C-2

Delta VL Series VFD 415V

• VFD055VL43A
• VFD075VL43A
• VFD110VL43A
• VFD150VL43A
• VFD185VL43A
• VFD220VL43A
• VFD300VL43A
• VFD370VL43A
• VFD450VL43A
• VFD550VL43A
• VFD750VL43A

Product Details:

Delta's VFD-ED series AC motor drive designed for elevators are based on years' of experiences in designing AC motor drives, and the experience accumulated since the first Delta elevator AC motor drive VL series launched in 2007. The VFD-ED Series Not only keep safety as first priority but also enhances operation efficiency and riding comfort.

ApplicationsHome elevator, cargo elevator, passenger elevator in both residential and commercial buildings
Specifications

• Power rating from 2.2kW to 75 kW
• Supports both asynchronous and synchronous motors
• Output frequency up to 400Hz
• 8 programmable digital inputs/ 6 programmable output
• Supports various encoders (ABZ, ABZ+UVW, SIN/COS, SIN/COS+Endat2.1)
• Supports single output contactor operation (SIL2)
• Built-in with CAN/Modbus communication interface
• Built-in 7 segment digit keypad, optional LCD keypad available
• Auto-tuning with the load attached
• Overload capacity up to 200%
• Supports 1-phase 230VAC Uninterrupted Power System(UPS)
• Compact dimensions

Model Number

• VFD022ED21S
• VFD040ED43S
• VFD055ED43S
• VFD075ED43S
• VFD110ED43S
• VFD150ED43S
• VFD185ED43S
• VFD220ED43S
• VFD300ED43S
• VFD370ED43S
• VFD450ED43S
• VFD550ED43S
• VFD750ED43S

Product Details:

Applications

 

• Edge banding machine

• Logistic conveyor

• Material handling

• Constant pressure pump

Specifications

1. Compact, simple and durable design.
2. Multi-speed operation and control mode: digital panel, external terminal and Modbus communication.
3. Multi-pump control; PID Control.
4. Support one drive with two motors in parallel and Time Out Detection function.
5. High overload capacity, 150% rated current for 1 min.
6. Certification: CE, RoHS, GB12668.3

Product Details:

The VFD-C2000 series is a high-level field oriented control AC motor drive with a high-performance variable-frequency technology, FOC control. It features versatile driving controls, modular design, wide variety of applications, easy maintenance, low malfunction rate, self diagnosis and competitive market price and brings customers not only the high-efficiency construction but also the most economic solution to compete with the global market.

Applications-Crane and printing machines

Specifications

• Speed/torque/position control mode, dual rating design (Normal duty/heavy duty)
• Outstanding 4-quadrant torque control/limit
• 2 in 1 (induction motor and synchronous motor)
• Built-in Delta PLC function, safe stop function and brake unit
• Support of various network protocols
• Synchronous position control
• Long-life design and life detection of important components
• Enhanced protections and adaptation to ambient conditions
• Complies with global safety standards, including CE, UL and cUL
• Modular design for easy maintenance and many extensions
• High-speed communication interface with built-in CANopen and MODBUS communication (optional cards for PROFIBUS-DP, DeviceNet, MODBUS TCP and EtherNet/IP)

Model Number-Delta C2000 Series VFD 415V

• VFD007C43A
• VFD015C43A
• VFD022C43B
• VFD037C43A
• VFD040C43A
• VFD055C43A
• VFD075C43A
• VFD110C43A
• VFD150C43A
• VFD150C43A
• VFD220C43A
• VFD300C43A
• VFD370C43S
• VFD450C43S
• VFD550C43A
• VFD750C43A
• VFD900C43A
• VFD1100C43A
• VFD1320C43A
• VFD1600C43A
• VFD1850C43A
• VFD2200C43A
• VFD2800C43A
• VFD3150C43A
• VFD3550C43A
• VFD4500C43A

Product Details:

FV20 Series VFD Kinco High Performance Vector VFD

Built-in EMC filter.

Low speed high torque, small torque ripple.

Optimized structural design, small size.

Strict reliability and long life, support background monitoring.

 

??? Main Features

 

   • Built-in EMC filter, optimize the electrical environment of EMC field equipment.

   • Low speed high torque, small torque ripple, automatic current limit.

   • Optimized structural design, small size, 45kw and below built-in brake unit.

   • Strict reliability and long life design, support background monitoring software.???